Discreet 3-Point Radon Mitigation System for Finished Basement with Cellar Room

In this nearly finished basement, high radon levels prompted a 3-point radon mitigation system to ensure complete coverage and peace of mind. Two extraction points will be placed in the utility room, which wraps around in a small U-shape and showed elevated readings. The third point will be installed in a cellar room tucked behind a wooden door, boxes were cleared to access the space during the assessment. Per homeowner request, the system will exit to the left of the exterior window, and a fan housing cover is expected to be included for a cleaner appearance. With strategic placement and thoughtful routing, this project blends effective radon removal with minimal disruption to the finished living space.

3-Point System Installation and Sump Replacement

With radon levels testing over 30 pCi/L, this home required a three-point mitigation system to ensure proper pressure balance and effective radon reduction. Installation is scheduled with extraction points set near the airconditioning AC unit on the side of the home. During the project, our team will also replace the sump basin and install a new discharge line to improve drainage performance and system efficiency. These combined upgrades will help deliver long-term protection and healthier indoor air quality.

Efficient 4-Point Radon Mitigation System Installation

This project required a 4-point radon mitigation system to address four separate chambers within the home. Our team designed a straightforward layout with clean branch lines to each extraction point, ensuring effective coverage throughout the basement. The system exits on the same side of the home as the woodshop blower motor for an efficient setup. The homeowner will be handling the electrical work, so we’ll stop the wire outside and walk him through the final connections. With clear planning and collaboration, this system will provide strong protection against radon exposure.

A New Home with a Radon Mitigation System

The client was moving into a home they had just purchased and wanted to ensure it was safe. During the home inspection, radon levels were found to be above the recommended threshold. Although the seller offered to reduce the home price, the client prioritized health over savings and insisted on a mitigation system being installed before closing. Once the system was in place, the client felt secure knowing their new home was safe for their family.

Custom 4-Point Radon Mitigation System for Complex Basement Layout

This home required a 4-point radon mitigation system due to its uniquely divided basement with multiple chambers. Spotty cell service made on-site communication difficult, and photo uploads failed—but the project sketch still came through, offering a basic layout.

Despite the challenges, the plan remained clear: install four extraction points strategically throughout the space and determine the cleanest routing path on site. Flexibility was key—our techs were ready to use their expertise or jump on a quick FaceTime call to finalize routing in real-time.

When communication is limited, experience and adaptability make all the difference. This install proves our team can handle the unexpected—and still deliver guaranteed results.